BoltBot
A boxy little robot that holds any pose you bend it into. Standard lugs, built to be added to.
Ships in 2–4 days · printed to order in the color they pick
No magnets, no batteries, no paint — raw name-brand filament only. Recommended ages 6+.
Original Xeno 3D design
The full story
BoltBot holds a pose the way good action figures used to — firm joints, no flopping. Every joint is a printed ball-and-socket tuned to grip for years of repositioning, and the lugs on its back and arms are a standard size, so any snap-on pack we design later — tools, wings, a cart — will fit. It arrives fully assembled and stands on its own feet, which is more than most robots can say. Made to order in-house, finished by hand, and checked over before it ships. Need a color, size, or finish you don't see here? Drop us a note and we'll sort it out.
Material & care
Printed in premium PLA+ or PETG depending on application. Wipe clean with a damp cloth. Avoid prolonged direct sun for PLA+ items; choose PETG or ASA for outdoor use — just ask.
Specifications
- Print process
- FDM, produced to order
- Layer height
- 0.16–0.20 mm
- Finish
- Off build plate / textured
- Filament used
- ~85 g
- Print time
- ~5 h
- Recommended age
- 6+
- Lead time
- 2–4 business days
You may also like
Prism Flex Snake
A chunky faceted snake that flexes, coils, and clacks. Prints already assembled.
Twist Star Tower
A spiral star that collapses flat and springs back. Quiet enough for a classroom.
Clik Rail Slider
A thumb slider with a real click and zero magnets. The spring is printed in.
Orbit Gear Spinner
A planetary gearset you can hold. Prints meshed together; the herringbone teeth keep it that way.