Clik Rail Slider
A thumb slider with a real click and zero magnets. The spring is printed in.
Ships in 2–4 days · printed to order in the color they pick
No magnets, no batteries, no paint — raw name-brand filament only. Recommended ages 6+.
Original Xeno 3D design
The full story
Most sliders get their click from a pair of magnets, which we will not put in a kids' product. Ours gets it from a printed plastic spring riding over bumps — same satisfying snap, nothing to swallow, nothing to lose. The cap is captured on its rail so it cannot come off, and the whole thing lives happily in a jeans pocket. Pick your body and slider colors separately. Made to order in-house, finished by hand, and checked over before it ships. Need a color, size, or finish you don't see here? Drop us a note and we'll sort it out.
Material & care
Printed in premium PLA+ or PETG depending on application. Wipe clean with a damp cloth. Avoid prolonged direct sun for PLA+ items; choose PETG or ASA for outdoor use — just ask.
Specifications
- Print process
- FDM, produced to order
- Layer height
- 0.16–0.20 mm
- Finish
- Off build plate / textured
- Filament used
- ~35 g
- Print time
- ~2.5 h
- Recommended age
- 6+
- Lead time
- 2–4 business days
You may also like
Prism Flex Snake
A chunky faceted snake that flexes, coils, and clacks. Prints already assembled.
Twist Star Tower
A spiral star that collapses flat and springs back. Quiet enough for a classroom.
Orbit Gear Spinner
A planetary gearset you can hold. Prints meshed together; the herringbone teeth keep it that way.
My Name Tracing Board
Their own name, carved as grooves they trace with a chunky stylus until writing clicks.